>>>>>>>>>KENWOOD 建伍TS590 又升级啦！ [复制链接]

AMATEUR RADIO PRODUCTS SOFTWARE DOWNLOADS / Kenwood
http://www.kenwood.com/i/products/info/amateur/software_download.html


TS-590S Firmware update information
http://www.kenwood.com/i/products/info/amateur/ts_590/ts590_update_e.html
---------------------------------------------------------------------------------------------------

有道翻译: http://www.kenwood.com/i/products/info/amateur/ts_590/ts590_update_e.html
http://fanyi.youdao.com/WebpageTranslate?keyfrom=fanyi.web.index&url=http%3A%2F%2Fwww.kenwood.com%2Fi%2Fproducts%2Finfo%2Famateur%2Fts_590%2Fts590_update_e.html&type=AUTO

有啥大幅度改革么？

升级2.0完毕后，打开590菜单，把65菜单正确设成电脑com几，才能打开590自带软件

等板砖

更新很多，还是要等TS-590SG

BD8SZ:更新很多，还是要等TS-590SG (2015-01-29 13:44) 

从S的感受来看 很必要入590SG

都是有钱人，不如咬咬牙上TS990S

BG4KYA:升级2.0完毕后，打开590菜单，把65菜单正确设成电脑com几，才能打开590自带软件
 (2015-01-29 11:36) 

请问，这个如何设置？没看懂，我昨天升级后，LOG32连不上了，MMV也连不上了～～

ddt-ddv:请问，这个如何设置？没看懂，我昨天升级后，LOG32连不上了，MMV也连不上了～～ (2015-01-30 12:33) 

升级以后是复位，你没有提前在建武自带软件程序里保存你590机器菜单的参数，什么都复位了，所以你要从头进入590菜单里设置；com-波特率等，用功放别忘设53号菜单否则功放不起控。。。

590用户反复围观590折腾狂！

BG4KYA:升级以后是复位，你没有提前在建武自带软件程序里保存你590机器菜单的参数，什么都复位了，所以你要从头进入590菜单里设置；com-波特率等，用功放别忘设53号菜单否则功放不起控。。。 (2015-01-30 16:23) 

我全部按原来的菜单搞了一遍，应该没问题，HRD能用，但就是LOG32    MMV都不行，怪了，ARUA-10那里是个红圈带斜杠，是不是USB没通？但HRD就没问题

ddt-ddv:我全部按原来的菜单搞了一遍，应该没问题，HRD能用，但就是LOG32    MMV都不行，怪了，ARUA-10那里是个红圈带斜杠，是不是USB没通？但HRD就没问题 (2015-01-30 23:37) 

我不玩log32，玩的log用的是小蝴蝶Mix 2.19，一点没事

这么多升级，又要忙阵子了...

BA7NQ:这么多升级，又要忙阵子了...[表情]  (2015-02-05 11:09) 

强烈要求站长给TS590s用户发年底奖；SDR-IQ

TS-590S又升级，始终没丢弃，哈哈哈哈

TS-590S Firmware update information
http://www.kenwood.com/i/products/info/amateur/ts_590/ts590_update_e.html
=====================================================================
Firmware update information    Last updated : November 17, 2016


The HF/50MHz All-mode transceiver TS-590S firmware has been updated from Version 2.02 to Version 2.03 as follows.
We are offering the firmware updating program to the TS-590S owners.
You can update the TS-590S firmware by connecting the TS-590S to the PC by using a USB cable or an RS-232C cable.
The firmware updating program is not applicable for the TS-590SG.
The TS-590S is no longer in production. The firmware updating program Ver.2.03 is applicable for all units of the TS-590S.

Attention
    Updating the firmware from Ver.1.08 (or before) to Ver.2.03 resets the transceiver automatically due to internal memory address reallocation. If you do not want to lose user data, save the data using the latest version Radio Control Program ARCP-590 (Ver.2.02) before updating the firmware and write the data back after updating the firmware.

About virtual COM port driver
    A virtual COM port driver needs to be installed onto the PC to use the firmware updating program with a USB cable.
     ATTENTION:Do not connect the transceiver to a PC using a USB cable before installing the virtual COM port driver.

建伍很多机型因为有了TS890而升级了，有建伍的都看看
AMATEUR RADIO PRODUCTS SOFTWARE DOWNLOADS / KENWOOD  http://www.kenwood.com/i/products/info/amateur/software_download.html

图片:1537274966(1).png

          

建伍TS590s  2019.1.30升级
TS-590S Firmware update information

TS-590S Firmware update information Last updated : January 30, 2019

The HF/50MHz All-mode transceiver TS-590S firmware has been updated from Version 2.03 to Version 2.04 as follows. We are offering the firmware updating program to the TS-590S owners. You can update the TS-590S firmware by connecting the TS-590S to the PC by using a USB cable or an RS-232C cable. The firmware updating program is not applicable for the TS-590SG. The TS-590S is no longer in production. The firmware updating program Ver.2.04 is applicable for all units of the TS-590S.

Attention

Updating the firmware from Ver.1.08 (or before) to Ver.2.04 resets the transceiver automatically due to internal memory address reallocation. If you do not want to lose user data, save the data using the Radio Control Program ARCP-590 (Ver.2.02) before updating the firmware and write the data back after updating the firmware.

About virtual COM port driver

A virtual COM port driver needs to be installed onto the PC to use the firmware updating program with a USB cable. ATTENTION:Do not connect the transceiver to a PC using a USB cable before installing the virtual COM port driver.

Updated item : (Version 2.03 2.04) [January 30, 2019] The following feature is updated. 1. Enables to work as a "Sub-receiver" on "Split Transfer A" operation with using a TS-890S or a TS-590SG (firmware Ver.1.05 or later) as a "TX/RX End". Set both of the Menu No.58 and 59 to "ON" to turn the TS-590S Split Transfer function on in VFO operation. [backcolor=url(&amp]The TS-590S does not work as a "TX/RX End". Please use a TS-890S or a TS-590SG (firmware Ver.1.05 or later) as a "TX/RX End". [backcolor=url(&amp]For details of the "Split Transfer A" operations, please refer to the TS-890S instruction manuals or the revised TS-590SG instruction manuals.

哈罗CQ火腿社区 - 设备 - TS-590 2010 Kenwood新产品 - 第10页 - Powered by phpwind
https://www.hellocq.net/forum/read.php?tid=236282&page=10

哈罗CQ火腿社区 - 设备 - TS-590 2010 Kenwood新产品 - 第10页 - Powered by phpwind
https://www.hellocq.net/forum/read.php?tid=236282&page=10

AMATEUR RADIO PRODUCTS SOFTWARE DOWNLOADS / KENWOOD  
https://www.kenwood.com/i/products/info/amateur/software_download.html

图片:13_38824_c4d58120748a2aa.jpg

图片:微信图片_20190322104348.jpg

图片:微信图片_20190322104412.jpg