- frequency specification bugfix when performing an area coverage variable sweep (11-dec) -规范修正错误的频率时执行的地区覆盖面变后掠(11至12月)
- devide-by-zero bug removed from circular-polarization calculations (23-nov) - devide由零错误11月撤销圆极化计算(23)
- official nec2 bugfix (related to the use of surface-patches) in nec2dxs*.exe engine files as proposed by j.burke of llnl (9-nov) -官方nec2缺陷修复的表面补丁的exe)在nec2dxs *.引擎(有关使用文件,11月提出的j的伯克llnl实验室(9)
- touchstone import addded on smith-chart (7-nov) -试金石进口11月addded对史密斯图表(7)
- initial freq-sweep setting changed so by default f/b data is generated. -初始频率扫设置默认情况下会产生如此改变f数据是/乙。
- tabctl.ocx was missing, added to installer. - tabctl.ocx失踪,加上安装程序。 (3-nov) (3至11月)
- spreadsheet style nec-editor added. -电子表格风格nec的主编说。
- cosmetic changes smith-chart; touchstone exports (z11, s11) added. -化妆品的变化史密斯图表;试金石出口(的z11,s11为)补充。
- predefined ground-, wire- and coax-data added in text-files so user can extend it. -预定义的地面,有线和同轴电缆,数据将在文本文件,这样用户可以扩展它。
changes for 5.6.4 (25 sep 2006) 为改变5.6.4(2006年9月25日)
- since version 5.6.1, genetic optimizer suddenly stopped or didn't even start: bug was fixed. -自版本5.6.1,遗传优化器突然停止或什至没有启动:问题是固定的。
changes for 5.6.3 (15 sep 2006) 为改变5.6.3(06年9月15日)
- resizable main window and some other cosmetic changes. -可调整大小的主要窗口和其他一些表面的改变。
- bugfix when using multiple/split excitation sources. -修正了当使用多个/分裂激励来源。
- bugfix related to frequency selection box on optimizer form (f12). -修正了相关的频率(f12键选择框优化形式)。
- bugfix related to optimizing far-field data including surface-wave. -修正了相关的优化远场数据,包括地面波。
- some bugfixes related to stub-matching form, however still in beta release -一些bug修正有关的存根匹配的形式,但仍处于beta版
- few other minor bugfixes. -很少有轻微错误修正。
changes for 5.6.2 (8 apr 2006) 为改变5.6.2(2006年4月8日)
- some 300 extra categorized example files added. -约300多张影像分类的例子。
- under certain conditions, in geometry edit all wires were saved as single-segment wires. -在某些情况下,在几何中的修改所有的电线保存为单段线。 this bug was fixed. 此错误是固定的。
- bugfix because both ri and xi values were extracted from the same nec ri data-value when optimizing/sweeping a model containing split voltage/current sources. -修正了因为无论日与希值分别取自同一来源的nec日的数据值时,优化/扫描模式包含分裂电压/电流。
- bugfix when using variable names longer than 8 chars in genetic optimizer. -修正了当使用优化的变量名长度超过8个字符的遗传研究。
changes for 5.6.1 (3 mar 2006) 为改变5.6.1(2006年3月3日)
- geometry error bug when using gs card and running the optimizer removed. -几何误差时的错误用gs卡和运行优化删除。
- auto engine-selection bug solved for > 1500 seg's together with gm, gx and gr card. -自动分段数设置为:> 1500段时,满足gx和gr的卡。
- open last used file at start-up and a recent files-list added. -打开上次使用添加的文件在启动时和最近的文件列表。
- timing problems for multiple area-coverage plots on slow(er) systems solved. -解决了慢波系统的序时问题(er)。
- problems when inserting new records or creating new files in nec-edit solved again. -插入新记录时出现问题解决或创造新的文件再次在nec的编辑。
- tolerance in geometry check for inter-segment connections multiplied by 2. -几何公差在2检查连接部分乘以为国际米兰。
changes for 5.6.0 (14 jan 2006) 为改变5.6.0(2006年1月14日)
- direct plotting of itshf (voacap/icepac/rec533) time-, distance and graphical point-to-point plots added. -直接itshf绘制(voacap/icepac/rec533)时间,距离和图形点至点图说。
- direct entry of most important itshf parameters and settings on generate (f7) form. -对产生直接进入最重要的itshf设置参数和(中七)的形式。
- picture-viewer integrated into 4nec2 program for scrolling through multiple itshf plots. -图片,查看程序集成到4nec2滚动的阴谋通过多种itshf。
- itsutil.exe program added for easy modification of itshf contour/graph-colors and scaling and time/distance y-axis scaling. - itsutil.exe方案增加了对色彩和易于修改itshf轮廓/图的缩放和时间/距离y轴缩放。
changes for 5.5.4 (11 nov 2005) 为改变5.5.4(05年11月11日)
- bugfix nec4 when due to segment tapering using a gc card the nr of segments were changed. -修正了nec4逐渐减少时,由于部分用气相色谱卡段雍发生了变化。
- optimizer bugfix for single step gain values on 90 degree theta using perfect-ground. -优化修正错误的西塔使用完美地面单步增益值90度。
- bugfix (field not found) when using both autosegmentation and radius-conversion in optim. -修正了(现场未找到)当同时使用autosegmentation和半径,optim纤维转化研究。
- creating structures for over 30000 segments does not crash geometry builder any more 任何更多的建设者-建立结构超过30000段不会崩溃几何
- number of decimal places increased for wire coordinates in geometry-edit. -地方十进制数增加为坐标线的几何编辑。
changes for 5.5.3 (august 2005) 2005年变更为5.5.3(8月)
- multi-color display for tilt/phase, axial-ratio and sense on far-field added. -多彩色显示领域倾斜/相位,轴向比率和意识上远说。
- list-boxes for ground-types and ld materials added for nec-edit. -列出材料盒子地面类型和ld增加了对nec和编辑。
- optimizer makes no difference anymore between 'sy var = 123.4cm' and 'sy var = 123 cm' -优化没有区别'再变种之间茜亚=123.4厘米'和'茜亚的var = 123厘米'
- bug (crash) when adding wire without frequency specication in geometry-edit fixed. -错误(崩溃)当加入编辑线无频specication在几何中的固定。
- bugfix for gc card and mininec ground when used with nec4 engine. -修正了使用时与地面nec4引擎mininec气相色谱卡。
- bug (crash) when opening second file in geometry-edit fixed. -错误(崩溃)当开放编辑第二个文件在几何中的固定。
- wire-radius when converting ao files now correctly calculated. -丝半径转换时敖文件现在可以正确地计算。
changes for 5.5.2 (june 2005) 2005年变更为5.5.2(6月)
- major bugfix related to gm card and european regional settings. -重大修正错误的卡和相关的卡按欧洲的区域设置。
- import/conversion of eznec type input-files and eznec style 'mininec' ground added. -导入/地面转换eznec型输入文件和eznec式'mininec'补充。
- selection between multiple v/i sources for line-chart display -图多之间选择第v / -Ⅰ来源行显示
- display of db value to correct with for average gain test. -显示的分贝值,纠正与平均增益测试。
- geometry builder (build.exe) now supports autosegmentation. -几何生成器(build.exe)现在支持autosegmentation。
- bugfix when selecting more than 32 var's to optimize. -修正了当选择超过32个变种的优化。
changes for 5.5.1 (april 2005) 2005年变更为5.5.1(4月)
- far-field plot, theta angles > 360 degrees are now displayed as minus values. -远场图,θ角度> 360度现值显示为负。
- gnuplot 2d/3d display for azim/elavation angles and labeling corrected. -阿齐姆的gnuplot的2d/3d显示/ elavation角度和标签纠正。
- some nec-4 specific height- and radius tests corrected. -一些nec和4特定的高度和半径校正试验。
- print function did behave strange sometimes, now should be ok. -打印功能,有时也表现奇怪,现在应该没问题。
changes for 5.5.0 (jan 2005) 2005年变更为5.5.0(1)
- now possible to use with both nec-2 and nec-4 (nec4d*.exe) -现在可以使用两种nec和2和nec - 4(nec4d *. exe文件)
- problems resulting from xp service pack 2 discussed in this file. -问题造成的文件从xp服务包2这种讨论。
- segmentation-bug introduced with previous version 5.4.1 removed again. -分割的错误再次推出了5.4.1以前的版本中删除。
- same for bug related to gm cards in conjunction with surface patches. -同为卡错误相关的补丁一起。
- same for zero segment/wire length bug. -相同的错误零段/线段的长度。
changes on 5.4.x) 5.4.x变化对)
- extensive geometry checking added -广泛的几何检查补充
- batch processing for automatic calculation of multiple (4)nec2 files. - nec2文件批处理四)处理自动计算多个(。
- automatic convergence-testing function with line-chart result display. -自动收敛测试功能的线路图显示的结果。
- user selectable traditional- or eznec-style current/phase display. -用户可选择传统或eznec式电流/相显示。
- screen grabber added for easy cut/paste or print parts of the screen/window/form. -屏幕抓取者增加了对易剪切/粘贴或打印的形式部分/屏幕/窗口。
- bugfix related to regional setting when generating gnuplot data-files. -修正了相关的区域设置时产生的gnuplot数据文件。
- automatic generation of l, pi and t matching-networks (low- and high-pass) -自动生成的l,皮和t匹配的网络(低收入和高通)
- plot 2d and 3d graphs/charts using gnuplot freeware package -二维和三维图形绘制/图表使用gnuplot的免费软件包
- show circular polarization components e(left) and e(right) for far-field. -显示元件é圆极化(左)和e(右场)为远。
changes version 5.3.x (mar 03) 变化版本5.3.x(3月3日)
- usage of average/minimum or maximum value when optimizing on freq-sweep. -价值使用的平均/最低或最高优化扫描时,对频率-。
- radius/diameter bug removed for wire-radius combo-box in geometry-edit. -半径/直径错误编辑,取消了线半径组合,框在几何。
- pattern direction bug removed when using multiple current sources. -模式方向错误时,将删除使用多个电流源。
- possibility to specify insulated wires. -可能性指定绝缘电线。
- bugfix on saving a file without extension -修正了在没有保存文件的扩展名
- 'lc-trap' loading-type (ld 6) added. -为lc -陷阱'载入型(劳工处6)补充。
- auto-conversion of gn, ld cards for average-gain-test -自动转换gn,ld,试验卡的平均增益
changes version 5.0-5.2 (dec 01) 改版5.0-5.2(12 01)
- drawing style 3d geometry editor added. -图式三维几何编辑说。
- display of (arbritrary shape) patches added. -形状展示(arbritrary)补丁补充。
- additional checking on nec-2 output-file error's. -额外检查的389 - 2输出文件错误的。
- optimization for a range of frequencies now possible. -优化的频率范围成为可能。
- genetic optimization algorithms added. -遗传优化算法的补充。
- real-time directx based 3d-graphics viewer added. -实时三维基于directx的图形查看器添加。
- overall max for far/near field points, ld, ex, nt/tl cards increased. -整体最大的远/近场点,ld, ex, nt/tl 增加。
version 4.x 4.x版
- switchable theta/phi or azim/elev display. -切换西塔/披或阿齐姆/叶列夫显示。
- improved accuracy when using somnec ground with freq-loop -改进精度在使用循环somnec地面与频率
- automatic evaluation of swr, gain, f/r, etc. trends. -自动评价驻波比,增益,f/r(前后比)等趋势。
- current-sources (ex 6) added. -电流源(前6)补充。
- auto-segmentation functionality added. -自动分割功能补充。
- curve smoothing, lin- or log-scaling for graphs. -曲线平滑,林或登录图形缩放。
- front-to-rear data included in optimizer/evaluator -前端到后方的数据包含在优化/计算器
- support for windows-xp (max [for now] 5000 segments) -支持的windows xp的(最高段[现在] 5000)
- real-time geometry updating when using the 4nec2 editor -实时更新几何编辑器在使用4nec2
- additional power and swr information for selected wire/segment -附加的电源和驻波信息选定线段/段
- highlight selected 2d far-field trace in 3d view. -突出显示选定的二维远场微量元素的三维视图。
- optimizer added to optimize geometry-, loading or phase configuration -优化添加到优化几何,配置
- use variables and constants to configure the nec-2 input data. -使用变量和常量配置的nec - 2输入数据。
- forms lay-out updated and executable changed to 32-bit. -表格布局更新和可执行改为32位。
- itshf plot-file viewer added. - itshf情节文件观众补充说。
- geometry builder added -几何建设者补充
version 3.x 3.x版
- new and comprehensive help added. -增加新的和全面的帮助。
- near field 3d, 2d and 1d (linear graph) patterns added -近场三维,二维和一维(线性图)模式将
- smith-chart plot added for feed-line length determination -史密斯图图增加了对饲料线长度的确定
- automatic generation of far/near field, frequency loop and itshf files added. -自动生成的文件远/近场,频回路和itshf补充。
version 2.x 版本2.x
- structure validation added -结构验证补充
- reflection coefficient and swr graphs added -反射系数和驻波比图说
- display 2d far field patterns for frequency-sweep. -模式的频率,二维扫描显示远场。
- menu command structure added. -添加菜单命令结构。
- comment possibilities for 4nec2 input-files. 输入文件-评可能性4nec2。
- auto start 4nec2.exe for *.nec files. - 389文件自动启动4nec2.exe为*.。
some of the 4nec2 (1.0) basic functionality: 一些4nec2(1.0)的基本功能:
- read nec-2 input- and output-files and display geometry structure. -阅读389 - 2的输入和输出文件和显示的几何结构。
- rotate, shift, zoom-in and zoom-out geometry structure -旋转,平移,缩放,和缩小出几何结构
- show, zoom in/out rf-currents/3d-far-field on geometry structure -显示,放大rf-currents/3d-far-field几何/输出结构
- select segment and show segment current amplitude and phase -选择部分和显示部分的电流幅值和相位
- automatic generation of nec-2 output file and somnec ground files, -自动生成389 - 2输出文件和somnec地面文件,
- polar or linear plot for far-field or ground wave radiation pattern. -极地或辐射型线性情节的远场或地面波。
- show geometry inside polar plot. -显示几何里面极阴谋。
- load and compare other radiation patterns. -负荷和比较其他辐射模式。
- show impedance graphs for frequency range. -频率范围显示阻抗图。
- generate type 13 and 14 antenna files for hfwin32 propagation software -生成13和14型天线软件传播文件hfwin32