ic-v100 - mobile vhf radio
quick specs
mobile vhf transceiver
rx/tx: 136-155 mhz or 146-174 mhz (two versions)
output power: 50 w
modes: fm
receiver sensitivity: 0.35 礦 (fm, 12 db sinad)
ctcss standard
2-tone optional (see detailed specifications)
detailed specifications
general
frequency coverage:
136-155 mhz (low-band version)
146-174 mhz (high-band version)
mode: fm (16k0f3e)
number of memory channels: 16 (transmit, receive and ctcss frequencies are programmable)
channel spacing: 25 khz
antenna impedance: 50 ohms (unbalanced)
power supply requirement: 13.8 v dc 15% (negative ground)
current drain (at 13.8 v dc):
transmit: 12.0 a
receive (squelched): 500 ma
receive (max. audio power): 1.2 a
usable temperature range: -30癈 ~ +60癈; -22癋 ~ +140癋
frequency stability: 0.0005% (-30癈 ~ +60癈)
dimensions (projections not included):
both remote controller and main body: 170(w) x 50(h) x 260(d) mm; 6.7(w) x 2.0(h) x 10.2(d) in
remote controller only: 170(w) x 50(h) x 40(d) mm; 6.7(w) x 2.0(h) x 1.6(d) in
weight:
both remote controller and main body: 2.6 kg; 5.7 lb
remote controller only: 380 g; 13.4 oz
transmitter
output power: 50 w
max. frequency deviation: 5.0 khz
spurious emissions: -70 db
harmonic emissions: -70 db
fm hum and noise: -40 db
max. frequency separation:
low-band version: 8 mhz
high-band version: 26 mhz
receiver
modulation acceptance: 7 khz
sensitivity (for 12 db sinad): 0.35 礦
squelch sensitivity (threshold): 0.3 礦
adjacent channel selectivity: -70 db
intermodulation rejection: -70 db
spurious and image rejection: -80 db
audio output power: 5 w with a 4 ohms load.
max. frequency separation:
low-band version: 8 mhz
high-band version: 26 mhz
ic-v100 options
ck-12 remote cable kit: allows you 6 m (19.7 ft) separate installation of your ic-v100 front panel and main body in the vehicle.
hg-10 microphone hanger box: provides monitoring when operating with the tone squelch function even if the microphone is left hanging on the microphone hanger.
hm-37 dtmf microphone: heavy-duty hand microphone with dtmf keyboard.
hm-38 hand microphone: heavy-duty hand microphone.
ic-ps30 ac power supply: allows you to use the ic-v100 through ac power source. equipped with a dc power cable and 3 extra dc output connectors. output voltage: 13.8 v; max. current drain: 25 a
sp-5 external speaker: can be easily installed in any part of your vehicle. the same type as supplied with the ic-v100. input impedance: 4 ohms. max. input power: 5 w
sp-10 external speaker: compact and easy-to-install. input impedance: 4 ohms. max. input power: 5 w
ut-26 2-tone decoder unit: a 2-tone system receives only specific stations and provides a "personalized" squelch.
ut-27 2805 hz tone decoder unit: allows you to receive only specific stations using 2805 hz tones.
