TECHNICAL SPECIFICATION
5kHz to 30MHz frequency range
64MHz maximum internal sampling rate
Compatible with most free SDR software, such as SDR-Radio, Winrad, Linrad, HDSDR, CuteSDR etc.
User Programmable AGC (automatic gain control) with enhanced Power Detector
123dB total dynamic range with AGC (80dB with AGC off)
0.02Hz tuning resolution
10/100Base Ethernet interface for 400kHz sample rate through network (NetSDR protocol mode)
48kHz/16-bit Ch A and Ch B simultaneous USB audio output (looks like a standard USB audio interface to computer)
234kHz single-channel or 2x117kHz dual-channel USB output with libusb driver
Comprehensive daughtercard for up to 2.2GHz downconverter and input bandpass filters available on Q2 2013
On-board RS232TTL compatible serial port and I2C interface for driving external peripheral
Powered from USB port (requires Y cable for drawing power from two USB sockets simultaneously) or external 5VDC adapter (not included). (custom PoE can be fitted)
2x BNC Antenna connectors (Mfg: Rosenberger)
Max current consumption 600mA
Open software and hardware design for DIY development, filter upgrades etc.
