includes installed & tested battery holder ,
1 ea. of ic-2 cable, y-acc cable,
coax cable, & power cable
(requires 6 aa batteries, user provided)
the z-11pro, everything you always wanted in a small, portable tuner designed from the ground up for shack and battery operation; and only w4rt offers the z-11pro ultra with installed battery holder! an optional battery holder can be purchased for the z-11pro (blemished units too), which can be easily installed by the user. only 5" x 7.7" x 1.5" and weighing only 1.5 pounds, it handles 0.1 to 125 watts, making it ideal for both qrp and standard 100 watt transceivers from 160 through 6 meters. the z-11pro has 8,000 memories in ldg's exclusive 3-d memory array, automatically storing tuning configurations for each frequency and band as you use them, for each of four antennas on the single rf port. frequency sensing circuitry lets the z-11pro know your operating band and frequency. whenever you transmit on or near a frequency you've used before, the z-11pro retunes from memory almost instantly (even in ssb!). memories are retained indefinitely. rugged and easy-to-read leds indicate swr and status. the z-11pro uses latching relays which retain the tuned configuration even when powered down; current draw when not tuning is effectively zero. control from the front panel is simple and straightforward; just press tune while transmitting, and the z-11pro will begin a tuning cycle. the z-11pro will even tune while you talk on am or ssb. for more integrated operation, optional interfaces are available for most icom, kenwood, yaesu and alinco transceivers. with the interface, a single button-press transmits a carrier, executes a tuning cycle and returns the radio to its original power and mode. add the special steel top if you need to use magnetic mounts (only from w4rt). really nice to mount your cw key (like the palm paddles) or microphone when operating portable!
specifications
• 0 to 125 watts ssb and cw peak power, 100 watts digital
• easy to read leds indicate swr and status
• 8000 "3-d" memories for instantaneous frequency or band changing
• tuning time: 0.1 to 4 seconds full tune, < 0.1 second memory tune
• built in frequency counter for memory operation
• frequency coverage: 1.8 to 54.0 mhz.
• tunes 6 to 1000 ohm loads (16 to 150 ohms on 6m), 6 to 4000 ohms with optional 4:1 balun (ldg rba-4:1)
• for dipoles, verticals, vs, beams or and coax fed antenna
• optional external balun allows tuning of random length, long wire or ladder line fed antennas
• interfaces for icom and yaesu included
• power requirements: 8 to 16 volts dc at 300 ma max during tuning, 25 ua idle
• enclosure: 7.5 x 5.75 x 1.75 inches
• weight: 1.5 pounds (no internal batteries)
