马兰士c160/460/168/468)手持台功能表
keyfunction功能
0~9numeric input数字输入
lampdisplay illumination on/off背景照明灯
sql offsquelch control on/off静噪开关
b v/m entvfo/memory mode togglevfo/记忆（mr)模式切换
c?pagfrequency or address number down频率数或者信道向下变化
d?codefrequency or address number up频率数或者信道向上变化
#cl pscancel mode取消模式
*ms ms.mmemory scan on/off信道扫描开关
callcall up call frequency呼叫频率
call+f+# 扫描时越过mhz
f+1switch transmit power level发射功率调整
f+2dual watch on/off双频率守候开关
f+3memory shift mode on/off记忆变化开关
f+4tuning step setting频率步进设置
f+5save on/off省电开关
f+6frequency lock on/off锁键盘
f+7tone squelch/tone encoder toggle亚音静噪开关
f+8repeater mode on/off异频收发模式开关
f+9invert transmit and receive frequencies in repeater mode设置中继台亚音转发接收频率
f+0switch to set mode set模式转换
f+aturn lamp on长明灯开关
f+bswitch memory record mode切换记忆记录模式
f+cpaging / code squelch on/off记录/代码静噪开关
f+dcode setting mode代码设置模式
f+*ms.m setting/ms.m operationms.m设置/ms.m操作
f+#scan on/off扫描开关
f+call/p.lptt switch lock on /off发射锁定开关
f+sql offdtmf memory modedtmf记意模式
se->0beep on/offbp声开关
se->1length of paging beep 1/5 toggle呼叫bp声1/5切换
se->21khz column input from numeric keys enable/disable
toggle使能够从1khz开始设置频率
se->3repeater+pag transmission delay time半双工发送延迟时间
se->4squelch pop noise reduction减小弹出燥声
se->5apo(auto power off) on/off自动关闭电源开关
se->6enable encoder even in frequency lock status在频率锁定状态下也能使编码可能
se->7ctcss frequency setting mode (ctn160 tone frequency selection)ctcss
频率设置模式(ctn 160 双音频频率选择)
se->8repeater offset frequency setting半双工差频设置
se->9(display indications appear normally,but no tones are produced
internally.)(发射亚音设置)显示指示正常出现，但中间没有音频被建立
se->f+1all reset(restores factory settings)全部重新设置(恢复出厂时的设置)
se->f+2long medium pitched beep (boo) (no function)调频、调幅模式转换（c160/168有此功能）
se->f+3all reset enable/prohibit toggle全部清除使能够切换
se->f+4switch to protect mode保护模式转换
se->f+5squelch audio during paging even if code matches
se->f+6toggle tuning steps when rotary channel selector is turned with the
func key held down between 100khz and 1 mhz按f键时旋转旋钮，步进1mhz或100khz
se->f+7clone mode无线复制模式
se->f+8 无功能
se->f+9switch bank of optional cmu161 memory unit99/199信道转换开关（配置cmu161选件）
se->f+bdelete memory frequency删除记忆频率
se->f+0switch to extra modeea模式转换
ea->1high speed scan on/off扫描速度开关
ea->2high speed dual watch on/off快速双频率监视开关
ea->3change lamp key to rev key改灯键为倒频键
ea->4select interval for save function选择省电功能间隔时间
ea->5reduce dtmf transmission speed改变双音频发送速度
ea->6 设置频率范围
ea->7 按上下键时的频率步进
ea->8enable frequency input from 100 mhz column使键盘置频能够从100mhz位开始设置
ea->9 无功能
ea->0 无功能
