论坛风格切换切换到宽版
发帖 回复
返回列表
  • 2220阅读
  • 1回复

TS-990S firmware has been updated from Version 1.03 to Version 1.04 [复制链接]

 上一主题 下一主题
离线BG4DRL
注册用户
 
发帖
6934
只看楼主 倒序阅读 0楼 发表于: 2013-08-24
Updated items : (Version 1.03 1.04) [August 23, 2013]
Revises the following symptoms.
1.When sending certain character sequences using the built-in RTTY function, garbled text might be encoded.
2.When Advanced Menu No.22 "Standby State Low Power Consumption" is set to "On" and the TS-990S is turned off by the front panel power switch, the ARCP-990 may not detect the power off status correctly.
Updated items : (Version 1.02 1.03) [July 12, 2013]
Updates the following features.
1.Enables use of the TF-SET function while the CW/Voice Message screen is displayed.
2.Enables toggling Sub Band reception between ON and OFF while the CW/Voice Message screen is displayed.
3.When PF keys are pressed to play a CW/Voice Message while CW/Voice Message screen is not displayed, the CW/Voice Message screen is opened.It closes again after playing the message is completed.
If playing a message is stopped by F4[STOP] key, the CW/Voice Message screen remains.
4.Enables TF-SET function in Simplex mode while "XIT is ON and RIT is OFF".
While [TF-SET] key is pressed, XIT offset frequency can be set by [Tuning] (Main) control as well as [RIT/XIT] control.
The function does not work when RIT is ON.
Please also update the Radio Control Program ARCP-990 which includes above revisions.
5.Increases TX monitor maximum level by approximately 6dB.
6.Reduces CW full break-in RX noise.
7.Extends default AGC time constant values in "FAST", "MIDDLE", "SLOW"


美版，欧版机更新地址
http://www.kenwood.com/i/products/info/amateur/ts_990/ts990_update_e.html\

日规机 更新地址
http://www2.jvckenwood.com/products/amateur/hf_allmode/ts_990/ts990_update_j.html

[ 此帖被BG4DRL在2013-08-24 22:54重新编辑 ]
- Day After Day -
回复
举报
分享到 淘江湖 新浪 QQ微博 QQ空间 开心 人人 豆瓣 网易微博 百度 鲜果 白社会 飞信
离线BG4DRL
注册用户
发帖
6934
只看该作者 1楼 发表于: 2013-08-28
顶贴  
- Day After Day -
回复
举报
发帖 回复
返回列表