哈罗CQ火腿社区 - 设备 - 等不及S９的K3建武yaesu 外加LP-PAN2 + 喜欢的SDR软件

发帖: 6934

只看楼主倒序阅读 0楼发表于: 2013-07-30

等不及SDR的可以这样玩
取中频外加LP-PAN2 + NaP3等SDR软件
难道没人玩？ 260刀不算贵
http://www.telepostinc.com/LP-PAN.html

SDR Software for use with LP-PAN

Important notice about SDR software: The LP-PAN IF decoder hardware works with almost any SDR software program... WinRad, Rocky, CW-Skimmer and various custom versions of the open source PowerSDR^TM program from FlexRadio Systems. The user can use any or all of the above programs, many of which are freeware or open source. We recommend several programs which are more tightly integrated with LP-Bridge.

LP-Bridge... http://www.telepostinc.com/LPB.html
Freeware from N8LP. LP-Bridge is the "glue" that ties everything together... rig, SDR app, loggers, RTTY apps, web clusters, CW Skimmer, etc. All the apps get access to the rig at the same time with a very simple to use interface. The original LP-Bridge is designed to work with the K3 and supports PowerSDR/IF, TRX-Pan and NaP3. LP-Bridge 2 (LPB2) works with the K3, Yaesu (FT-950/2000/5000) and Kenwood and supports PowerSDR/IF and NaP3.

NaP3... http://www.telepostinc.com/NaP3.html
The newest and most popular SDR for use with LP-PAN is NaP3 by Pete, F5VNB. It is freeware and based on WU2X's version of the FlexRadio Systems PowerSDR^TM software, but includes some components of PowerSDR^TM 2.0.16 as well as new skins that Pete developed. The feature set includes the best features of both of the above programs, plus one really nice feature of the Elecraft P3... Fixed Tune mode. This allows the user to select a section of the band to display, then allows tuning both the VFO A and VFO B cursors over the display without the band segment changing. It also provides extremely high resolution when zoomed in, which makes it quite usable for tuning digital modes like RTTY and PSK.

PowerSDR^TM v1.19.3.5... http://www.telepostinc.com/PSDR.html
The first really good SDR for use with a rig's IF output is FlexRadio Systems PowerSDR^TM software v1.19.3.5, modified and supported by WU2X. It incorporates a number of specific improvements to optimize its use as a panadapter, and integration with a real radio. Please help Scott and his team with their work on this software with a donation if you like it.

TRX-Pan... http://www.telepostinc.com/TRXP.html
A relatively new freeware entrant is TRX-Pan from Laurent, F6DEX. It does not provide an audio output of the tuned signal, but has some very nice graphic display features for users of rigs like K3 and FTdx5000 who don't need audio output. Larry, N8LP is a software contributor to this program as well. It is less cluttered and easier to configure than FlexRadio Systems PowerSDR^TM software v1.19.3.5. It interfaces to either LP-Bridge or TRX-Manager,

CW-Skimmer
This is a unique and popular program from Alex, VE3NEA that is used to decode an entire band of CW signals and provide call signs and clickable spots to tune your rig to each station in the band. It can be used standalone with LP-PAN or in conjunction with LP-Bridge and one of the above SDR apps. This software is not free, but is relatively low cost. Go to Alex's CW Skimmer web page for details.

Latest LP-PAN Installation/Setup/Operation guide with detailed instructions for installing and using the above programs.

[ 此帖被BG4DRL在2013-08-09 00:33重新编辑 ]

图片:DSCN1300b.jpg
图片:DSCN1311c.jpg

- Day After Day -

分享到 淘江湖新浪 QQ微博 QQ空间开心人人豆瓣网易微博百度鲜果白社会飞信

离线BG4DRL

注册用户

发帖: 6934

只看该作者 1楼发表于: 2013-07-30

最近版本都升级很快 NaP3已经可以出很实用的瀑布了
玩SDR-IQ的除外咯

- Day After Day -

在线BD8CS

注册用户

发帖: 18939

只看该作者 2楼发表于: 2013-07-30

s9 wifi+LAN

四川·南充 173 614 59973

离线BG4DRL

注册用户

发帖: 6934

只看该作者 3楼发表于: 2013-07-30

回 BD8SZ 的帖子

BD8SZ:s9 wifi+LAN (2013-07-30 11:14)

SZ大大
那你肯定要等到月光版的SUNSDR2来

- Day After Day -

离线BG4DRL

注册用户

发帖: 6934

只看该作者 4楼发表于: 2013-07-30

真心觉得SDR-IQ不错，就是RF太麻烦要用ELAD的RF-SW
你去买个SDR-IP的吧等你架设WebSDR基地台

- Day After Day -

离线BG4DRL

注册用户

发帖: 6934

只看该作者 5楼发表于: 2013-07-30

K3的不要去买P3了吧才3khz的采样这个挺好

- Day After Day -

离线BG4DRL

注册用户

发帖: 6934

只看该作者 6楼发表于: 2013-08-02

各类型号零中频
8.215 MHz (Elecraft K3)
8.83 MHz (Kenwood)
9.0 MHz (Orion, FTdx5000)
4.915 MHz (Elecraft K2)
10.7 MHz (IC-R8500/9500, others)
10.55 MHz (FT-950/2000)