MCU 2.15 / DSP 1.30, 8-15-2014
* CW-IN-SSB IMPROVEMENT: The operator’s specified CW QSK delay is now used during CW-in-SSB, even with external CW keying. (This was already working with the internal keyer.)
* 2-M DIRECT FREQUENCY ENTRY FROM OTHER BANDS: Range is 120-168 MHz. Note: Sensitivity falls off as you move out of the 144-148 MHz range.
* 2-M TX FREQUENCY RANGE LIMITED: 144-148 MHz (144-146 in some countries).
* INCREASE IN ALLOWED TX CURRENT: Allows full-power output on some bands where previously a drop to 5 watts had been observed (with an external 12-14 V supply).
