updated items : (version 1.04 1.05) [november 30, 2011]
updates the following features.
1. adds the menu no.3q2:[aprs]-[auto-reply]-[delay time] as a new function.
when you receive an aprs message, operating the transceiver during the delay time will cancel sending an auto-reply message.
you can set the delay time to "0 sec", "10 sec" (default), or "30 sec". setting to "0 sec" sends an auto-reply message without delay time the same as before updating the firmware.
2. adds characters "aa:" which means "auto answer" at the beginning of auto-reply messages' text following the recommendation in the aprs spec addendum 1.1.
3. changes the name of the menu no.3t1:[aprs]-[sound]-[tx beep (beacon)] to [tx beep], and enables the output of a beep sound when transmitting an auto-reply message as well as a beacon (position packet).
4. adds "edit" function in the aprs message menu. it enables editing of the destination callsign and sentences in received or sent messages and resend.
5. due to adding the "edit" function above, disables automatic quotation when using "reply" function.
6. adds the menu no.13a:[radio]-[tx/rx]-[tot](time-out timer).
you can set the length of time the transceiver can continue to transmit to "0.5 min","1.0 min","1.5 min", "2.0 min", "2.5 min", "3.0 min", "3.5 min", "4.0 min", "4.5 min", "5.0 min", or "10.0 min". the default setting is "10.0 min" the same as the fixed value before updating the firmware.
this update changes the th-d72a's menu no.13a (wx alert) and 13b (auto wx scan) to menu no.13b (wx alert) and 13c (auto wx scan).
