Main functions:
One USB output connects to PC.
USB port isolator separates PC ground.
No system divers need (Windows, Linux, MAC?), most are already present.
USB HUB included.
Supported operation modes - CW, FSK, AFSK, SSB.
Integrated K3NG keyer for Arduino.
Open K3NG code with many functions.
Command Line Interface (CLI) or winkey support included.
Include exchanged Arduino MEGA (ADK) board.
Two CW/PTT outputs.
LCD showes playing message.
Three memory buttons.
USB host for usb keyboard connection (with Arduino Mega-ADK only).
CW speed potentiometer.
Integrated USB Audio codec.
Input and output isolated with transformer.
Three butons output volume/mute setting.
Input volume potentiometer.
Microphone mute, if foot sw is not activate.
Hardware FSK interface.
Based on FTDI FT232 widely supported chip.
Can be used also for CW/PTT keying.
Provides serial communication with Arduino MEGA.
TRX CAT interface.
Supports ICOM CI-V, Kenwood/Yaesu UART.
Free usb output from the USB hub is available for additional USB devices connecting.
Ready for Remote HUB and Cisco SIP phone
