It is best to leave C7 off until you have the transceiver fully functioning on transmit and receive. Studying the right column on Page 13 you will see that you should have a good carrier on transmit somewhere around 7.230 with the tuning pot at the highest frequency, T2 and T3 peaked, and the R24 power adjust pot at just below the highest output power setting, around 1.90 watts. DO NOT proceed until you fix the carrier problem and the frequency problem. It could be the wrong number of turns on toroid L1 (you may need to remove a turn on L1 if the L.O. is too low), or improper capacitor in the C3, 4, 5, 6, 8, 9 position. Before proceeding the transceiver must be transmitting on around 7.230.
这一段当中
It is best to leave C7 off until you have the transceiver fully functioning on transmit and receive.
这句话不能领会c7要什么状态哇 是空在那里 还是短路它 还是还是
还有这个L1 (you may need to remove a turn on L1 if the L.O. is too low) 说明书里要求24圈 我确实觉得饶了24圈 说是要在7230,我的在7170，是不是要把L1拆掉一两圈的哇
嗷了个呜
猜不到方向了 谁来救救我
