回帖：> hello all,
> maybe somone has run itno this before and can help. i dual-
banded a
> kenwood tk-730 and tk-830 and have it working but when i go to
program
> it only goes from 20k to 16k on the display and 12% on the software
> and stops responding. when i reset the radio all the frequencies are
> there and work but only the first 2 get the alphanumeric names. the
> rest keep there generic name of gr # ch #. could this have something
> to do w/ the chips in the control head & radio for determinign
number
> of channels? i have no idea which chip numbers are the 32 and which
> are the 10 but i moved them around from other x30 radios until they
> all matched. any help in this are would be appreciated.
>
> bear
the memory chips will be marked x24c__pi 04=32 chan 16=160
chan.if you need more than 32 channels total install a 16 in the
head...both the 16 or 04 can be in the two radios, however total of
the head is limited to 160
i suspect if the hookup is ok that it is a programming glitch...try
starting over with setting up the file. or if you have another dual
band 30 which is working try loading that software. js