![]() |
|
|
#1 |
|
怪兽级火腿(******)
加入日期: 2004-09-17
帖子: 585
![]() |
FT-450扩频
扩好后的发射频率范围1.8~30M
扩频位置: 断开 JP4002 跳线端。 关闭电源,拆下前面板,拿掉屏蔽罩看到控制板,把 JP4002 跳线断开。 装复机器,按住[ATT/IPO], [NB], [AGC] 键开机。 "SMADJO" 会显示在屏幕上。 旋转[DSP/SEL]钮到 显示"TYPE"。 按一下[F] 键, 确认 "F"图标亮起。 当"F" 图标亮起,按下 [NB]键。 "t" 将会显示在频率显示最右边处。 按住[F] 键三秒钟,一声长声后, 屏幕会回复频率显示模式,操作结束。 ![]()
__________________
BG5FBR QQ:3 2 5 8 4 4 6 7 浙江省台州市 Email:3 2 5 8 4 4 6 7@QQ.com 1390 657 |
|
|
|
|
|
#2 |
|
怪兽级火腿(******)
加入日期: 2004-09-17
帖子: 585
![]() |
FT-450隐藏菜单的开启
By pressing and holding the following keys while powering on the radio you will gain access to the hidden menu of the Yaesu FT-450. 按住几个键开机,即可进入隐藏菜单模式。 Press and hold ATT/IPO, NB and AGC buttons at the same time and press the power button and power on radio while still holding in these buttons, and to change the setting you simply use the DSP control (rotary) to select the item you want to change and use the main VFO knob to alter the independant settings of your choice. 按住ATT/IPO, NB , AGC 这三个键开机,然后就可以用DSP键控制隐藏菜单,用VFP钮调整你想要更改的选项。 (to change the color of your screen, change the settings of LEDINT1 LEDINT2 and LEDINT3, will do most colors. To exit the hidden menu simply press (F) function key. In some radios the radio might also do a full reset. So if you go in there and change anything in there and if you ruin a perfectly good radio no one is to blame but YOU 比如说更改屏幕颜色,修改ledint1 ledint2 ledint3的参数。推出隐藏菜单模式,只需按一下F键。
__________________
BG5FBR QQ:3 2 5 8 4 4 6 7 浙江省台州市 Email:3 2 5 8 4 4 6 7@QQ.com 1390 657 |
|
|
|
|
|
#3 |
|
菜鸟(*)
加入日期: 2006-06-05
帖子: 39
![]() |
谢谢啦,收藏了。
__________________
呼号:BG4DQQ(三级) 上海F-1赛车场裁判长 国家(汽车)一级裁判 姓名:郑洁 地址:上海市杨浦区平凉路1490弄1号 邮编:200090 电话:13301809375 |
|
|
|
|
|
#4 |
|
怪兽级火腿(******)
加入日期: 2004-09-17
帖子: 585
![]() |
不客气啊,我打算过了保就扩。
__________________
BG5FBR QQ:3 2 5 8 4 4 6 7 浙江省台州市 Email:3 2 5 8 4 4 6 7@QQ.com 1390 657 |
|
|
|
;