rino 120 data 及 power 接線, 有少少地方可注意, 可以看看這個:
一個 diy rino cable的網頁:
http://homepage3.nifty.com/mediawiz/gps/rino外在供電注意事項
http://www.hamhud.net/rino-exp.htmlthe rino wants 3.3v +/- 0.1v. below 3.2v, the "electric plug" icon does not show up. i do not want to find out what happens above 3.4v!
there are two external power issues with the rino:
1. the rino gets very upset when you apply external power when the frs radio is on! it will "beep" and immediately power down, and it will not power back up until external power is removed!
2. the rino does something i had not seen other garmin gps's do, which is kind of cool, in a way: it will power the gps down if external power fails, unless you press a key within 30 seconds. below is a screen shot of the powerdown countdown.