分享一个Astro 25 Portable CPS R07.00.00 depot [复制链接]

在网上找别的软件时偶然发现的，Astro 25 Portable CPS R07.00.00 Depot.zip

网站有限速，下载速度一直在20K-40K之间晃悠，我用了3个多小时。

http://depositfiles.com/files/g6ugnslia

希望对大家有用处。貌似是目前的最新版本。

CPS_README.TXT内容摘抄

===============================================
ASTRO 25 Portable Depot R07.00.00
===============================================

New Radios supported (when available):
======================================

-Immersible XTS-2500 (XTS-2500i)

-Model 1 with Display for the XTS-1500 and MT-1500

-Rebanding Models

-B Model Platform


New Radio Features Supported:
=============================
NOTE: Firmware version R07.00.00 required for all features

-Support for 800 MHz rebanding

-DVRS

-GPS Location over ASTRO 25 Trunking Systems

-Configuration of Multiple Conversation mode

-FCC-Compliant FPP on the XTS-2500 and XTS-5000

-UCM Hardware Encryption for the XTS-2500 portable

-ASTRO 25 LE System support

-VRS with Scan

TUNER_README.TXT内容摘抄
===============================================================
ASTRO 25 Tuner R04.01.00
===============================================================

Enhancements:
=============
The Tuner application now supports the new XTL 5000 O5 control
head, XTL 2500 and XTL 1500 mobile radios.

Radio Models Supported:
=======================
This software supports the following models
XTS 1500
XTS 2500
XTS 5000
SSE 5000
MT  1500
ASTRO Spectra Plus
XTL 1500
XTL 2500
XTL 5000

Supported features:
===================
PA Bias (XTL radios only)
Reference Oscillator
Transmit Power (High/Mid/Low) (not applicable to XTL radios)
Power Detection Calibration (XTL radios only)
Transmit Power Characterization (XTL radios only)
Current Limit (mobiles only)
Modulation Balance
Modulation Limit
Front-end filter
Battery Calibration (portables only)
Bit Error Rate test
Transmitter test pattern
Microphone Sensitivity (XTL radios only)
Save data to file
Restore data from file to radio
Print

E文难搞啊

没下载到

楼主，你说 链接我试了，下不下来，你可否直接给我QQ传一下，我也是MOTO控。

楼主，，想请教下，，我的版本是r07，我用r13软件写频，可是写不到，怎么做，，请指教。。